I wrote previously on eMagi about how to use your Playstation 2 Eyetoy camera under WindowsXP. Well the same process is required under Windows Vista. There has been some requests and since I’m now on Vista full time here is a walk through!
EDIT: It is NOT x64 compatible and I very much doubt such a driver will be created…
EDIT2: For faster support for any issues please post here and I will get back to you!
First up grab the drivers that I linked to here…
Old EyeToy - SLEH-000-30
Silver EyeToy -SLEH-00031
Once downloaded extract the files somewhere on your computer. Remember where you put it!
Now, plug in your EyeToy, Vista should ask you what to do.
Click on “Don’t show this message again for this device”
Now, right click on My Computer then click on Properties. Click on Device Manager.
Under the “Other Devices” header, you should see the “Eyetoy USB Camera Namtai” device. Right Click on this and click on Properties.
Click on “Re-install Driver” and then “Browse for my driver software“.
Remember where you extracted the downloaded files earlier on? Well its time to click on Browse and point it to the folder! Once done, click on “Next“.
Vista will ask a question to verify the driver. Click on “Install this driver software anyway“. It will then start installing. Just be patient!
Once done you should see this screen, click on Close.
A “sel3110″ window will pop up, just click on OK.
Another window will pop up. If you are in Europe then click Yes for the 50Hz option. If you are in Japan/USA then click on No.
Job done! You have now installed the Sony Eyetoy under Windows Vista to use as a webcam! To test it, open the folder that you downloaded here on eMagi and look for a file called “VIDCAP32“. Double click on it and you should see your Eyetoy working!
That’s it! If you have any questions then feel free to use the comment box below and I will try to get back to you as soon as I can!
Related posts
- EyeToy camera as a WindowsXP Webcam An easy to follow guide on how to make your...
- My move from Windows XP to Windows Vista Ultimate - Part One I have decided last week that it was time...
- Windows Vista RC1 Available to Download Windows Vista is now at the Release Candidate stage...
- How To: Get XAMPP working on Windows Vista I do a lot of my testing regarding webdesign...
- A limited edition of Windows Vista signed by Bill Gates? That’s right. With only a few days until the...
Using Eyetoy as webcam for WindowsXP and Vista | eMagi - Fighting the evil of boredom says:
[...] Vista and Eyetoy as a webcamera, Vista drivers | eMagi - Fighting the evil of boredom on October 29th, 2007 11:21 am [...]
Oct 29, 2007, 11:29 amYas V says:
Ah awesome, loads of people asked about this.
So the real question is how are you liking vista ?
I’m still with good ol’ XP can’t see me upgrading this year to be honest, I find it a lard ass.
I like what they have done with office vista its quite impressive the new menu system, although i have to admit I haven’t used it for daily work. I was just helping the boss insert a text box in a word document.
Oct 29, 2007, 1:13 pmMurphman12 says:
I can’t get it to work. It automatically installs it as a sound device.
Oct 29, 2007, 8:23 ameyetoy driver for vista ultimate - Forum - Diskusjon.no says:
[...] Her str det alt du trenger vite om bruke Playstation Eyetoy i Windows XP/Vista:http://www.emagi.co.uk/2007/10/29/windows-…and-the-eyetoy/ [...]
Oct 29, 2007, 2:11 pmNeoBlade says:
Yeah, I’m writing up an LG Shine FAQ type thing as well but I’m going to have one massive rant about Vista
I’m typing it up now actually, just need to find some suitable pictures…
Oct 29, 2007, 12:05 pmNeoBlade says:
Hi Murphman12, I’ll assume that since you said it automatically installs as a sound device then Vista is not giving you the first option in the walkthrough.
Click on Start and in the searchbar type in “Device Manager” and open it. Alternatively you can Right click on My Computer > Properties > Device Manager.
Plug in the Eyetoy and you should see it pop up. If not open the Imaging Devices tab and it should be in there. If it is, right click and Un-install. Click on Action then “Scan for Hardware Changes” and do the walkthrough again.
If it is not in Imaging Devices, then find out where it was installed. You said sound devices then have a look there. Find it and Uninstall the device. Click on Action > Scan for Hardware changes and try the walkthrough again ^_^
Oct 29, 2007, 12:13 pmelderwin says:
Anyway of making this driver x64 compatible for vista? It’s the only bit of hardware I’m having trouble with (Yes I know its not designed for Vista :])
Oct 29, 2007, 8:36 amNeoBlade says:
Sadly from what I know the way data is controlled in a 64-bit environment makes it difficult to easily reverse engineer drivers… I don’t have any first hand experience with the 64-bit version of Vista myself so cannot offer any advice.
If it were possible to run it as a 32-bit device then you might have some luck but I don’t know if such an option is available to you Elderwin.
Oct 29, 2007, 8:57 pmm-freak says:
i cant get my eyetoy to work after installation
Oct 29, 2007, 6:03 pmi have the black eyetoy w. sleh00031 can sum 1 help
Nai says:
Peazo tutorial!! xd It means that it’s very cool the guide :D:D:D:D Thanks, thanks very much
I’m spanish and I were looking for it 
but I hadn’t found until this moment :D:D
Oct 29, 2007, 11:43 amNeoBlade says:
m-freak - I’ll assume you’re installing on Vista? After installation and you take it out, you might have to re-install it because the driver isn’t signed. Usually you don’t have to but it could be a Vista practise.
Simply just keep the drivers somewhere on your computer and point it to the right place. If you don’t get the prompt for driver update then just follow the instructions from the Device Manager part of the walkthrough.
Oct 29, 2007, 4:53 amBrandon says:
wen i try to update the driver or reinstall the drivers it says WINDOWS WAS NOT ABLE TO INSTALL YOUR EYETOY USB CAMERA windows could not find driver software for your device
However i alreaady downloaded the vista verison and extrated the files
Oct 29, 2007, 3:47 pmNeoBlade says:
Hi Brandon ^_^ When updating/reinstalling the drivers did you follow these steps…
Remember where you extracted the downloaded files earlier on? Well its time to click on Browse and point it to the folder! Once done, click on “Next“.
Vista will ask a question to verify the driver. Click on “Install this driver software anyway“. It will then start installing. Just be patient!
Do not let Vista automatically search for the drivers. You manually point to them instead. Also make sure you have downloaded the correct drivers for your Eyetoy. Tell me how it goes Brandon!
Oct 29, 2007, 11:23 amshane says:
im using vista with the black eyetoy and ive done all you have said but i get and error.
This device cannot start. (Code 10) what is this and how do i fix it
Oct 29, 2007, 7:23 amNeoBlade says:
Hi Shane ^_^
Which model EyeToy do you have? Look underneath the black model and see if it is SLEH-000-30 or SLEH-00031. Download the correct drivers for it and slap it on your desktop.
Connect the Eyetoy and pop over to the Device Manager. Find the EyeToy > right click > uninstall.
Pull out the Eyetoy, then plug it back in and follow the steps once more. Tell me how you get on ^_^
Oct 29, 2007, 12:32 pmEye-Toy software for Vista???? says:
[...] http://www.emagi.co.uk/2007/10/29/wi…nd-the-eyetoy/ <<instructions http://www.emagi.co.uk/emagi/dsbc310…EH_ 00031.zip <<install file (ZIP) __________________ Ben/17/php, MySQL, HTML, CSS, Javascript, Ajax `~_~` Don’t forget to ++rep (Thanks!) Stimulus says to delete stupidity from Earth… I say if theres no stupid ppl, then how can there be clever ppl? [...]
Oct 29, 2007, 1:30 pmZappage04 says:
Hi. I’ve managed to get to the part where you have to manually find the drivers but it won’t let me go into the folders. I have the show subfolders checked but it won’t let me go in far enough. I also tried putting it on the desktop but it still wouldn’t work. Any ideas?
Oct 29, 2007, 2:54 pmInstall Eye Toy For Windows Vista - Dogpile Web Search says:
[...] Act Now: Offer Ends Today. Sponsored by: http://www.Grab-Vista.com [Found on Ads by Yahoo!] 13. Vista and Eyetoy as a webcamera, Vista drivers | eMagi - Fighting … How to use the Playstation Eyetoy camera as a webcam under Windows Vista, … Vista will ask a [...]
Oct 29, 2007, 10:28 pmMike says:
Very Nice!
Thankyou!
Worked a charm
Oct 29, 2007, 7:52 pmNeoBlade says:
Glad it works fine for you Mike ^_^
Zappage04: You just need to point it to the folder itself, no need to select individual files and that. Point it to the correct folder and click on Next to continue with the installation.
Don’t forget to extract the files beforehand as well! Leaving it all in the zip file will not work.
Oct 29, 2007, 4:37 amDan7712 says:
Heya,
I am running Vista and when I plug in my eyetoy (The old black one) It just pops up saying “Unknown Device” How do I get it working?
Thanks.
Oct 29, 2007, 8:21 pmNeoBlade says:
Hi Dan ^_^ Someone had a similar issue before (I should update my guide with an FAQ) but here is what you can do.
Click on Start and in the searchbar type in “Device Manager” and open it. Alternatively you can Right click on My Computer > Properties > Device Manager.
Plug in the Eyetoy and you should see it pop up. If not open the Imaging Devices tab and it should be in there. If it is, right click and Un-install.
Click on the Action menu at the top then “Scan for Hardware Changes” and do the walkthrough again.
If it is not in Imaging Devices, then find out where it was installed (where is says “Unknown Device”. Find it and Uninstall the device. Click on Action > Scan for Hardware changes and try the walkthrough again ^_^
Tell me how it goes for you Dan!
Oct 29, 2007, 2:45 amDan7712 says:
Thats for replying.
I done that. But it still keeps on saying that it is an “Unknown Device” and it puts it in the “Universal Serial Bus Controllers” tab with the name “Unknown Device”
Uninstalled it, Scanned for it, said it was unrecognized. Tried every USB port on my Laptop and it still said the same.
I am using Vista Home Premium (UK Edition if it makes a difference) on a Toshiba Laptop.
Anything else you can suggest? I could take screen shots in needed too.
Oct 29, 2007, 8:30 pmlilly says:
okay we did every step and got it working on the vidcap thingo now it wont work on msn. can someone help us
Oct 29, 2007, 12:37 amfrom dumb
Arron says:
Very nice. You’re the man! Great instructions, step-by-step, and even provide driver links. Perfect.
Anyone who can’t understand this just needs to give up on life now.
Oct 29, 2007, 1:58 amDoug Hess says:
Thank you for your help with eyetoy and vista! Everything is working perfectly. By The Way: Your site is in the top 5 or so if you search in google.com for
Oct 29, 2007, 5:23 pmeyetoy usb camera driver vista
Thought you might like to know.
Douglas
(SB)JD says:
um hey
when i extract the file and save it i can never find it?wheres the best place to save it to?? can you send me a PM to my email? thanks alot
Oct 29, 2007, 8:09 pmNeoBlade says:
Hi Doug ^_^ Glad it worked for you too. Still unsure why there are some issues for some as I’d assume other than some other tech stuff all the Vista Versions would handle this installation the same.
Thanks for the heads up too! I noticed that via Google if you just type in “Vista eyetoy” I’m listed too ^_^ Makes me happy that the guide works for people though.
Hi (SB)JD, what program do you use for compression? I personally use WinRAR however 7.z is also very good, and free ^_^ Vista should have built in zip support so you just open the file downloaded and drag the contents out on your desktop. Once you do that carry on with the steps in the guide.
Tell me how you get on though!
@ Lilly - I’ve not tried it with MSN as of yet but will do tonight and will get back to you. You might have to run the MSN setup though to get it working beforehand. What version of MSN are you running?
Oct 29, 2007, 9:17 amm fud says:
hi thanx so much simple and easy (= workin now you’re the best
Oct 29, 2007, 5:42 pmJables says:
on mine i get to the device manager and then i click properties and then i click the reinstall driver as instructed and then it cant find anything. i put the extracted files in a folder and when i pressed reinstall driver and i picked the folder where i placed the extracted files and it didnt work
what should i do?????
-jables
Oct 29, 2007, 7:25 pmBoxHeadRoom » Micropolis オープンソースなシムシティ says:
[...] Windows Vista でEyeToy [...]
Oct 29, 2007, 3:23 am2PLAY.CH - FORUM - Laufen diese treiber auch auf vista 64?? says:
[...] probier mal meinen treiber sag bescheid ob geht http://www.emagi.co.uk/2007/10/29/windows-vista-and-the-eyetoy/ der download ist auf meiner forumbeitarg danke sagen [...]
Oct 29, 2007, 3:36 pmmoises319 says:
Hi, i tried installing the driver on windows vista. i followed all of your instructions but at the end a message appears. “This device cannot start.(Code 10).” I have the old black eye toy. i have the 0030 model. Please Help!!
Oct 29, 2007, 12:52 ammark says:
hi im getting the same problem as one of the chaps higher up. when plugging the eyetoy into a usb port im getting it as a unknown device, the eyetoy is the 00031 version.
After going into the device manager and uninstalling and action new hardware im still getting it as an unknown device.
tried installing the software anyway and im getting the error message that the driver could not be installed for the device?
any help? would like to use it as i dnt wanna pay out for anuva device thanks.
Oct 29, 2007, 8:17 amDan7712 says:
I am glad I ain’t the only one getting this problem - Have you came up with a solution yet NeoBlade?
Oct 29, 2007, 5:57 pmeyetoy vista - Eniro says:
[...] Vista and Eyetoy as a webcamera, Vista drivers | eMagi.co.uk [...]
Oct 29, 2007, 3:16 pmeyetoy says:
I’m using Windows Vista Ultimate x64 and I can’t get it work!!!
Oct 29, 2007, 8:12 amPLEASE HELP ME!!!
Anders Jacobsen says:
You Will Always Have Problems With The Eye Toy And Windows Movie Maker If It Installs It As An Audio Device Only. You Should Look At My Blog For Help At http://www.jacobsen.no/anders/blog/archives/2006/01/05/how_to_use_the_playstation_eyetoy_on_windows.html
Here You Will Find Another Way Of Doing It If You Have Problems
Oct 29, 2007, 2:46 pmeyetoy usb camera driver | http://usb.worldsearching.org says:
[...] Vista and Eyetoy as a webcamera, Vista drivers | eMagi.co.uk [...]
Oct 29, 2007, 6:30 pmCamera Hacker: Forums: Using the Sony EyeToy as a USB WebCam on your PC says:
[...] ON WINDOWS VISTA, I NEVER HAD TESTED THE DRIVER ON WINDOWS XP YET, BUT IT WORK PERFECT ON VISTA….Windows Vista and the EyeToy PLEASE COPY THIS LINK ON YA SEARCH BAR OR JUST TYPE IN THE WEB SITE I JUST GAVE YOU ON YOUR GOOGLE [...]
Oct 29, 2007, 6:13 amgabbie says:
um, when it says go on my computer then properties and device manager.. i haven’t got other devices on it =/ and therefore i cant click eyetoy thingy!
Oct 29, 2007, 4:58 pmi’ve downloaded eyetoy on my comp before but im trying to on my laptop =/ its taking up all my memory and is not even working what shall i do? x
E says:
How about a driver for Vista and the new “Eye” for the PS3, that would be great.
Oct 29, 2007, 2:14 amn says:
Make sure you downloaded the right one. Like I have the black eyetoy but need the silver program. Look on the back to see witch one you have
Oct 29, 2007, 6:34 pmd says:
Is This Free
Oct 29, 2007, 1:32 pmnick says:
how do i record it onto my computer
Oct 29, 2007, 9:39 pmVeronica says:
OK i did it exactly right. IT should work. BUt i installed it early today… wrongly with the XP version type one. SO how can i uninstall the camera (i installed it with the older eyetoy 31 file thing) plz help i just need to do that and then it should work
Oct 29, 2007, 6:59 pmGIRL says:
I have got the old BLACK eye toy, but in the back it says SLEH-00031, so which of the drivers should I download, thank you very much.
Oct 29, 2007, 6:07 pmd says:
^^^ You Use The SLEH-00031 Drivers.
Oct 29, 2007, 1:01 pmGIRL says:
Thank you very much.
Oct 29, 2007, 1:15 pmgabbie says:
well i’ve bin trying to install webcam for ages now and i’ve followed these steps!
my webcam is the black old one but under neath it says SLEH-00031
Oct 29, 2007, 8:32 amso what would i click?
when i click re install driver it automatically just comes up
windows have successly installed the driver or sumthink and the other things dont come up!?
help pls.
gabbie says:
well.. i followed the rules but wen i re instaall the driver i browse and it works and then wen i click next it says :
Oct 29, 2007, 8:40 amthe best driver software for your device is already installed!
but then it dont work ??! :S:S
PLEASE HELP.
gabbie says:
i want it to work on msn iswell
Oct 29, 2007, 8:40 amgabbie says:
also i click vidcap but it says it wasnt detected.
Oct 29, 2007, 8:41 amPlanet-Habbos - Eye Toy Cam Treiber says:
[...] gibts schon viele Threads, aber gut. Hier der Link Schn kompliziert, soll aber helfen. Ich hoffe, du hast keine Probleme mit Englisch. Edit: [...]
Oct 29, 2007, 6:37 pmluis says:
thanks:)wwwwwwwwwwuuhhhhuu it works^^
Oct 29, 2007, 11:34 amOlivia says:
The driver wasn’t detected after i had plugged in the eyetoy and pointed out the folder. I have the silver eyetoy SCEH-0004 .. Can anyone help me please ??
Oct 29, 2007, 3:30 pmx
M@ says:
Thanks this was very easy and it worked.
Oct 29, 2007, 11:13 pmJames Parsons says:
I have managed to install it fine but when people ask for me to go on cam on msn and I accept it comes up that I cancelled it straight away, anyone know why this is? cheers
Oct 29, 2007, 4:47 pmeyetoy sleh 00031 says:
[...] with drivers … toy, but in the back it says sleh-00031, so which of the drivers should I … http://www.emagi.co.uk/2007/10/29/windows-vista-and-the-eyetoy Logitech sleh-00031/sleh-00030 Driver Summary Driver for sleh-00031/sleh-00030, USB Composite [...]
Oct 29, 2007, 3:15 pmlalo says:
This is what it sayes when i try to instll it
The drivers for this device are not installed. (Code 28)
The required section was not found in the INF.
To reinstall the drivers for this device, click Reinstall Driver.
Oct 29, 2007, 6:18 pmMr.D says:
Hi, I have a black eyetoy, it says SLEH-00031.
Oct 29, 2007, 6:18 amI downloaded both to be on the safe side, tried the SLEH-00030 one, couldnt detect it, then applied the SLEH-00031 (having followed your instructions) and it went all the way to the windows security (red windows box one) followed that, then after “installing” it, it says it cannot start, code 10.
I’m using Vista, the thing is, I’ve succesfully isntalled it on XP a year ago, it just doesn’t work on my vista for some reason.
Any help would be appreciated.
patch - GIGA.DE - Community Forum says:
[...] patch Hi, http://www.emagi.co.uk/2007/10/29/wi…nd-the-eyetoy/. MfG EW __________________ But no living man am [...]
Oct 29, 2007, 3:11 pmbob says:
when i double click on that thing it said to extract files first,so i di and then i double clicked it again and it said device was not detected.this is the only one that worked this far until the end.please help
Oct 29, 2007, 9:09 pmDave says:
Hi
Oct 29, 2007, 10:38 amThis worked for me after following the Vista instructions you gave but then the next day when I plugged it in, it didn’t work
Any ideas?
Dave says:
oh and i just realised, on device manager i don’t have a section called other devices, i ddi yesterday
Oct 29, 2007, 10:41 amZac says:
No matter what i doit says it can’t find any suitable driver what should i do=(
Oct 29, 2007, 8:14 pmDivez says:
it used to work but when i have reinstalled vista, it did not work any more no matter how i try. sorry for the bad english. vista regognizes it an audio device automaticly.
Oct 29, 2007, 4:12 amNeoBlade says:
Sorry for the late reply to some of these questions! You will get a faster response if you post on my forum here on eMagi as I try to put them all into an FAQ.
In response to Dave:
This is often a trait that I can’t reproduce 100% but know it exists. The best way to fix this is to plug the Playstation EyeToy back into the computer and then follow these steps…
- Right click on My Computer then click on Properties. Click on Device Manager.
- Under the “Other Devices” header, you should see the “Eyetoy USB Camera Namtai” device. Right Click on this and click on Uninstall.
Now follow the install procedure once more and see if it works. I don’t know of a permanent fix as it seems its just how Windows handles this driver.
Response to Divez
it used to work but when i have reinstalled vista, it did not work any more no matter how i try. sorry for the bad english. vista regognizes it an audio device automaticly.
Follow the same steps above to Uninstall the Eyetoy. Once done make sure to follow these steps…
- Now, plug in your EyeToy, Vista should ask you what to do.
- Click on “Don’t show this message again for this device”
- Now, right click on My Computer then click on Properties. Click on Device Manager.
- Under the “Other Devices” header, you should see the “Eyetoy USB Camera Namtai” device. Right Click on this and click on Properties.
Now try following the guide once more.
Oct 29, 2007, 1:24 pmreece says:
help wen i try to install windoes tells me there is no soft ware i hav retryed many times and followed ur instructions but still the same answer hhhhhhhhhhhhhhhhhhhhhheeeeeeeeeeeeeeeeeellllllllllllllllppppppppppppp
Oct 29, 2007, 12:03 pmEye toy Video recording HELP PLEASE!!! - Official PlayStation Community says:
[...] Eye toy Video recording HELP PLEASE!!! http://www.emagi.co.uk/2007/10/29/wi…nd-the-eyetoy/ [...]
Oct 29, 2007, 5:48 pmKelly says:
Installed drivers, no probs and the camera is working fine as a webcam. My issue is that the vidcap file wont work. Just says “capture device not detected”, and then something about the stream rate. I want to use it primarily for recording short videos if possible, I am running Vista and very new to it as I’ve had XP up until 4 days ago!
Oct 29, 2007, 5:54 pmvista boy says:
hi i have tryed everything but i am getting the same error code code 10
Oct 29, 2007, 12:52 pmDave says:
Well, i don’t have a other devices section, my eyetoy only appears for audio devices
Oct 29, 2007, 1:51 pmRobbie says:
I still cant do it, i get up to the bit where it wants be to pointit to where i put my extracted files but when i tell them the address it says it cant find any drivers. Help me please
Oct 29, 2007, 3:30 pmJosh says:
Please note that it’s not just silver webcam’s that can be SLEH-00031 as my black one is.
Oct 29, 2007, 4:09 pmOnlineglück Forum > Technik > EyeToy web cam says:
[...] weil der erste Link im "Waaah, hilfeeee Vistaaaa" Thread auch auf diese Seite führt: http://www.emagi.co.uk/2007/10/29/windows-vista-and-the-eyetoy/ Wegen dir ist jetz noch eine Minute meines lebens dafür [...]
Oct 29, 2007, 1:28 amHoddie says:
Bummer I tried this numerous times but my Eyetoy is from Japan and the serial type is SCJH-10001N and these drivers just seem to be a no go with it,looked at the INf files but where to hack ?
Oct 29, 2007, 1:39 pmNeoBlade says:
Sorry for the late response guys! Remember it helps to post on my forum for a quicker response as I’m building up an FAQ to help resolve any of these issues. Remember though that it is a hacked driver and not certified by Microsoft so you might have to re-install the driver every now and then.
If you get a Device Error Code 10 then try this. Plug in the Eyetoy and un-install the driver. Pull oug the Eyetoy then reboot Vista. Plug the Eyetoy back in and then re-install the driver like before.
I have had some friends that have had the Code 10 error before but upon re-installing its fine.
@Dave: If you only see it as an Audio Device then it was not installed correctly. Please un-install and re-install and tell me how it goes ^_^
@Robbie: Just extract the files on your desktop and when prompted point to that folder and it should work. No need to select sub-folders or anything.
Oct 29, 2007, 2:56 pmAlfredo says:
hello can anyone help?, I have a Namtai SLEH-00201 EyeToy camera but, I can´t find the drivers for the windows! please help me.
Oct 29, 2007, 1:28 pmthank you!!
harry says:
my comp ceeps saying couldent find software then searches 4 a soulution then says compatability between this programe was an issue
Oct 29, 2007, 3:12 pmEyetoy Vista Drivers by Smurf - -= NeXtRL Community =- News Wii, Xbox360 & PS3 says:
[...] http://www.emagi.co.uk/2007/10/29/windows-…and-the-eyetoy/io ho usato questa guida ed ha funzionato anche se la spia rossa che rileva poca luce rimane sempre accesa anche di giorno ——————– [...]
Oct 29, 2007, 1:10 pmfreeman says:
well, i have the same problem on vista with sceh-0004, it installs fine, but it does not work with msn
Oct 29, 2007, 12:18 amGracee says:
Hey thanks for the help, =] It kind of worked until the last few steps. On the part where it says it has successfully updated the driver software well it did say that but it also said it had an error or something so i clicked ok or finish or whatever and carried on the rest of it cos i thought it might still work but on the last step- VIDCAM32 it also said no capture device detected.
Oct 29, 2007, 8:31 amPlease would you be able to say whats wrong or anything lol,
Thanks anyway
x
Gracee says:
Thanks for help on it anyway it kind of worked to some extent except it didnt identify it or something like that.
Oct 29, 2007, 8:33 amPenspinner says:
It don’t work… It says….
It said Windows found driver software but encountered an error while attempting to install it.
The required section was not found in the INF.
If you know the manufacturer of your device, you can visit its website and check the support section for driver software.
Oct 29, 2007, 1:11 pmeye toy for vista - HooSeek - recherche Web says:
[...] … http://www.emagi.co.uk/2006/09/12/use-your-sony-eyetoy-camera-as-a-webcam/ - Pages similaires 11. Vista and Eyetoy as a webcamera, Vista drivers | eMagi.co.uk How to use the Playstation Eyetoy camera as a webcam under Windows Vista, with drivers. [...]
Oct 29, 2007, 1:06 pmPS3MAN says:
How can I open my photos? It says they are an unknown data type. Which program do I have to use to open them? And what shall I choose in the photo size?
Oct 29, 2007, 10:41 amTHX in advance.
Install Eye Toy For Windows Vista - Windows Vista, Home Basic, Home Premium, Business and Ultimate says:
[...] Vista and Eyetoy as a webcamera, Vista drivers | eMagi.co.uk Pingback by Install Eye Toy For Windows Vista - Dogpile Web Search. Made Monday, 17 of December , 2007 at 10 … Act Now: Offer Ends Today. Sponsored by: http://www.Grab-Vista.com … http://www.emagi.co.uk/2007/10/29/windo... [...]
Oct 29, 2007, 6:02 amlachyisded3 says:
Im getting the same error (28) about the INF.
Oct 29, 2007, 6:34 amLachy.
Anthony says:
My problem is the thing with the inf the last time i did it it said something webcam not installed:S
Oct 29, 2007, 4:00 pmJack says:
i have been tryin to get this to work but when i try to reinstall the driver it cannot find the driver any ideas?
thanks
Oct 29, 2007, 1:15 pmJack says:
i have been tryin to get this to work but when i try to reinstall the driver it cannot find the driver any ideas?
thanks
email me on jackward11@hotmail.com
Oct 29, 2007, 1:16 pmeyetoy vista | VIRGILIO Ricerca | Web says:
[...] in italiano Web108.000 risultati per eyetoy vistaVista and Eyetoy as a webcamera, Vista drivers | eMagi.co.ukHow to use the Playstation Eyetoy camera as a webcam under Windows Vista, with [...]
Oct 29, 2007, 6:54 amElect - Playstation Eye 19.99 at RCSS (london) - RedFlagDeals.com Forums says:
[...] guy did make one : Windows XP http://www.emagi.co.uk/2006/09/12/us…a-as-a-webcam/ Windows Vista http://www.emagi.co.uk/2007/10/29/wi…nd-the-eyetoy/ I haven’t tried it myself yet though, so I cant guarantee it works, maybe Ill try later. It [...]
Oct 29, 2007, 2:34 pmps2 eye toy -- LiveWire Tech Forums says:
[...] http://www.emagi.co.uk/2007/10/29/windows-vista-and-the-eyetoy/ ——-”They may forget what you said, but they will never forget how you made them feel.” [...]
Oct 29, 2007, 11:45 amAnnie says:
This was a very easy install for Vista.. Works better than I would have hoped. I did it for XP and thought no way would I find the drivers for Vista, but here they are…. You rock!!!!
Oct 29, 2007, 10:50 pmBlood says:
i got it to work but it seems to only take a still image the instant its activated, whats up?
Oct 29, 2007, 6:57 pmEm says:
I am have a little trouble i did most of the first few steps but when it came to extracting the software it wouldnt work and i knew where i put it but it still could not read the file. what do i do if this happens
Oct 29, 2007, 12:05 amRob says:
Works but its really blurry
Oct 29, 2007, 5:54 pmGibt es für Vista Treiber für die Eye Toy Kamera? | Lycos iQ says:
[...] http://www.emagi.co.uk/2007/10/29/windows-vista-and-the-eyetoy/ kopieren da findest du treiber. Bitteschön. LG Wissender [...]
Oct 29, 2007, 6:50 pmGibt es für Vista Treiber für die Eye Toy Kamera? | P.M. BesserWissen says:
[...] http://www.emagi.co.uk/2007/10/29/windows-vista-and-the-eyetoy/ kopieren da findest du treiber. Bitteschön. LG Wissender [...]
Oct 29, 2007, 9:32 amDearJuliet says:
When I plug my eyetoy in (I’m using the old black one) and I run through it, i.e the device manager etc, and locate my files, it tells me that I need to update my driver software?
Oct 29, 2007, 1:12 pmHelp?
∂| Fantascienza.com | TenForward Forum | Leggi la discussione - eyetoy says:
[...] qui: - http://www.emagi.co.uk/2007/10/29/windows-vista-and-the-eyetoy/ - http://rapidshare.com/files/16891295/Eyetoyvistadrivers.rar.html_________________Lui pu [...]
Oct 29, 2007, 1:17 pmEstuaryPig says:
Works great! Ta much.
Oct 29, 2007, 4:00 pmEyeToy USB camera Namtai Driver - Web - WebCrawler says:
[...] it work … en.wikipedia.org/wiki/EyeToy [Found on Windows Live, Yahoo! Search] Vista and Eyetoy as a webcamera, Vista drivers | eMagi.co.uk … Playstation Eyetoy camera as a webcam under Windows Vista, with drivers … the "Other [...]
Oct 29, 2007, 4:10 pmCam says:
YOU ARE AMAZING…!!!…!!!!
Oct 29, 2007, 7:33 pmlewis says:
i have downloaded the driver for the old eye toy the black one,
Oct 29, 2007, 5:34 pmbut when i get to the bit when i have to Browse for my driver software on my computer, the thing i downloaded can’t be found on the computer but when i go back into my documents it is still there. the driver i downloaded is a notebook file but i don’t no weater to change that or not,
plz help
Alice says:
I have downloaded the files
Oct 29, 2007, 6:50 pmand put them in a folder on my desktop
when i get to downloading once i find the file and click next
it tells me there is no files there to use..
so i go back at look but they are still there
can anyone help me to sort this out
ive tried doing it a few times but it just says there is no files there
:S
nick says:
hi ive done this and it worked but when i try it there is a red light on my eye toy cam and it wont work can someon help plz?
Oct 29, 2007, 4:57 pmJack says:
I have followed your instructions above to the letter everything you say happens does, but when in Browse for drivers i selected the right folder with the right drivers (i have tried many times before) and yet my Vista says that the drivers are not there…
Oct 29, 2007, 2:13 pmThis same thing has happend with many other websites telling me to install this extract browse to that folder every single time it fails on that last bit. I have Windows Vista 64 Home Premium, and thing you can tell me that will help.
My email is Flap_Jack_Black@hotmail.com
Emil says:
hi,
i did exactly as the instructions told me but, when i browse for the file (step05) i find dsbc310_winxp2k98se_driver110_eyetoy_HACKED_SLEH_00031 is this what u have? anyway i click on that then ok. Then i click next, then a page pops out saying windows was unable to install your Eyeteoy USB camera Namtai. and under it says windows cannot find driver software for your device. I am using a windows vista and have the SLEH 00031model eyetoy, you know one of the old black ones. If it is possible can anybody help me? Thank You!
Oct 29, 2007, 1:11 amdave says:
i am having the same exact problem as emil..it say it cannot find driver software for my device and i know im checking right where i downloaded it to AND i did extract all files.
Oct 29, 2007, 1:42 amAchim says:
Thank you - it works and I’m happy …
Oct 29, 2007, 11:39 pmKev_efc4eva says:
Thanks NeoBlade that walk through worked for me, it also works on msn which was a bonus
Oct 29, 2007, 2:38 pmJon says:
Neo - Brilliant! worked 1st time and so easy for a biff like me. Thank you so much
Oct 29, 2007, 5:28 pmeye toy kamera webiks says:
[...] oon yrittny muuttaa tota eye toy kameraa http://www.emagi.co.uk/2007/10/29/windows-vista-and-the-eyetoy/ ton sivun avulla webiks. kaikki on muuten onnistunu paitsi ett kun noitten ohjeitten lopussa pit [...]
Oct 29, 2007, 2:35 pmplaystation eye - PS3HaX Network - PS3 Hacks says:
[...] foofighters, Here is a link to use the playstation eye toy http://www.emagi.co.uk/2007/10/29/wi…nd-the-eyetoy/ And here is the link for the vista playstation eye drivers,info,dev,progress etc… [...]
Oct 29, 2007, 8:20 amkais0r says:
I have a bit of info for you.
Oct 29, 2007, 4:23 pm… I have the old black eyetoy model, and the SLEH-00-00-30 drivers wouldn’t be detected..
I tried with the newer model’s drivers.. and it installed. :/
k4tt says:
Just testing the comments again
Oct 29, 2007, 10:36 pmNeoBlade says:
Nice to see the comments back alive and working ^_^ Hopefully many people have managed to get it all working now with the guide!
Oct 29, 2007, 11:56 pmGamefreQ says:
I’m using the Black SLEH 031 model of the eyetoy on the latest version of Windows VIsta Home Premium on a rather new PC. I follow all of the instructions, and everything checks out. I tell it that I DO NOT live in the 50 hz area, (Florida, USA) and it still doesn’t seem to work although it seems to have installed correctly. I click on VIDCAP32.EXE and it gives me this error: “capture device is not installed correctly”
Oct 29, 2007, 10:35 pmMike says:
Thank you so much:)
A lot of things arent Vista compatible these days. I’m glad my EyeToy still is.
Do you accept Pay-Pal donations? Because I’d love to donate to you. Keep up the great work:)
-Mike
Oct 29, 2007, 7:05 amSpencer Christie says:
Hey!
I did this on my vista 32 bit + my namtai eyetoy and it worked great!
but now for some reason it doesnt work:(
ive gone into device manager + now instead of saying namtai eyetoy it says unknown device!! its been lik dis 4 a while! i tried different usb ports and tried uninstallin den reinstallin da software but it doesnt work:(!!!! plz help!
Oct 29, 2007, 6:48 pmC.Houston says:
I followed your exact instructions, and it worked perfect!!! Thanks…
Oct 29, 2007, 5:22 amMarleii says:
heii guys,
i managed to install my old eyetoy cam sleh-00031. i also get vidcap32 started.
Oct 29, 2007, 10:33 pmthe only problem is, that when i start vidcap32, the screen where the eyetoy screen should appear, starts flickering.
maybe you can help me?!
thanks
SaLeM says:
The reason for the drivers not working on Vista is because they are mistaken at the links above (and so on all the other websites where this drivers are too).
“Old EyeToy - SLEH-000-30″ <- - - - - - - - - -
“Silver EyeToy -SLEH-00031″
That’s wrong. The black (old) camera is the -SLEH-00031 one. I just found it out on my Eye Toy.
Cya.
Oct 29, 2007, 5:03 pmCasey says:
Hey.
I downloaded this a couple of weeks ago and followed the instructions and it worked perfectly with msn and everything.
it started stuffing up andm just being a blank black square. so i tryed to do stuff to help it and i was gonna click disable but i accidently clicked uninstall.
now how can i install it again?
my eyetoy is the black one.
Oct 29, 2007, 12:44 pmim on vista
Casey says:
*correction*
i didnt click uninstall.
i clicked CleanDev.exe in the eyetoy driver folder.
Oct 29, 2007, 7:25 amDavid Z says:
Hey, I have a Namtai Eyetoy black SLEH-0031, and i used it on my XP version of windows. i recently switched to vista, and it say Vista Home Basic 32bit. everytime i try to use the driver, it says “Windows was unable to install your EyeToy USB Camera Namtai” in bold letters, and then it says “Windows could not find driver software for your device. If you know the manufacturer of your device, you can visit it’s website and check it’s support section for driver software.
Now, i have followed all directions, but it just doesnt let me.
Oct 29, 2007, 7:19 pmis it not compatible with my Vista?
Please respond -DZ.
tom says:
my mate said that on his computer my webcam just came up with an animated webcam with a cross on top of it why does it do this
Oct 29, 2007, 2:46 pmJBM says:
i have a question about the driver file:
Oct 29, 2007, 2:29 amin the download window it shows the file name, and i noticed the word “HACKED” in the file name.
any reason on that?
i wont download it until i find out why it says that